-
Prekidač pritiska zraka 70–100 PSI | Automatski prekidač za upravljanje kompresorom | Za teške radne uslove i sisteme zračnog ogibljenja
Regular price $25.00 USDRegular priceUnit price per -
200 PSI manometar za zrak sa dvostrukim pokazivačem | Manometar za pritisak vazdušnog kočovanja | Za teške mašine
Regular price $39.95 USDRegular priceUnit price per -
Prekidač pritiska zraka 110–135 PSI | Automatski prekidač za upravljanje kompresorom | Za teške uslove rada i sisteme vazdušnog ogibanja
Regular price $25.00 USDRegular priceUnit price per -
200 PSI manometar za dvostruko iglu | Manometar za pritisak vazdušnog kočionog sistema | Uključuje spojke | Za teške radne uslove
Regular price $52.95 USDRegular priceUnit price per -
Prekidač pritiska zraka 150–180 PSI | Automatski prekidač za upravljanje kompresorom | Za teške radne uslove i sisteme vazdušnog ogibanja
Regular price $25.00 USDRegular priceUnit price per -
Prekidač pritiska zraka 110–150 PSI | Automatski prekidač za upravljanje kompresorom | Za teške dužinske sisteme vazdušnog ovjeza
Regular price $25.00 USDRegular priceUnit price per -
Pletena cijev od nehrđajućeg čelika 700 mm sa širenim priključcima | Čvrsta linija za zračno ogibanje | Visok pritisak i izdržljiva
Regular price $48.95 USDRegular priceUnit price per
An air pressure switch tells your compressor when to start and stop, so the tank stays within a set range without you watching it. Pick the range that suits your system:
Choose a range whose upper limit sits at or below your compressor's working pressure and your tank's rating. The PX02 and PX07 list 0–150 PSI working pressure, the PX01 tops out at 150 PSI, and BOSS aluminum tanks list 0–170 PSI. A switch set inside those limits lets the compressor rest between cycles instead of running against a full tank.
To see what's happening in each air bag, fit the 200 PSI dual-needle gauge. Its two needles show left and right pressure on one dial, and it has a 12V backlight and a 1/4″ NPT connection. It's also sold with fittings included.
For the line between compressor and tank, there's a 700 mm stainless braided hose with 3/8″ flare fittings and a 3/8″ bore.
Building a system? Start with a compressor and an aluminum air tank.